|
|
Build Your Online Product Catalogs?
| Product Name: |
Road Marking Machine Single Thermoplastic Paint Pre-Heater
|
| Supply Ability: |
10000 sets |
| Related proudcts |
road marking machine, hot melt kettle, road marking preheat, |
| Specifications |
YHHF-400 |
| Price Term: |
FOB |
| Port of loading: |
Zhenjiang City |
| Minimum Order |
1 set |
| Unit Price: |
USD3500-3700 |
|
Technical Data:
Model Number: YHHF-400
Diesel Power(W): 10.6KW(14HP)
Diesel engine startup mode: Manual or electric start
Hydraulic motor power: 13KM
Transmission Model: Hydraulic transmission
Heating Mode: Liquefied petroleum gas (Diesel injection burner coming soon)
The number of bottle: Two
Cylinder capacity? 400kg ?16 bags ?
Cylinder structure: Suspended
Insulation construction: Three layers of circular heat preservation
Bottom of the pot material: High carbon steel alloy
Thickness of bottom of the pot: 10mm
Panel material: Stainless steel
Hydraulic oil tank capacity?50L
Heating temperature: 0-300?
Recommended discharge temperature: 180-220?
Machine weight: 400kg
Dimensions(L*W*H): 990*1550*1460mm
Application:
Thermoplastic pre-heater, also called hot melt kettle, always matched with thermoplastic machine, is used for heating, melting, and stirring thermoplastic road marking paints continuously, preparing hot melt paints for the thermoplastic road marking machine during long distance road lines marking work.
Thermoplastic pre-heater can be used in the following areas:
Highways-for guiding and controlling traffic
City roads-for smooth flow of traffic city streets
Airports & runways
Side streets
Parking lots
Railway platform
Bus stops
Zebra crossing
Bike paths
Motorway etc
Warnnig Tips:
1. The temperature is high, so wear gloves before operate the thermoplastic pre-heater to prevent getting burnt.
2. If the thermoplastic paint is wet or there is water in the kettle, please open the cover on the kettle when heated.
3. During the construction, first, put powder coating (additives) into the hot-melt kettle. The heating temperature must be controlled between 180 ? ~ 220 ?.
4. Begain stirring while melting, when the paint into a homogeneous liquid state (above 100?). Turn reversing valves in neutral first, when the paddle is completely stopped, then starting the reverse stirring.
5.And then, the hot-melt material is ready to be discharged into the thermoplastic road mar |
| Company: |
Zhenjiang Winfar Transport Facilities Co.,Ltd
|
| Contact: |
Mr. Jack tao |
| Address: |
Gudong Village, Shangdang Town, Dantu District |
| Postcode: |
212000 |
| Tel: |
13815034152 |
| Fax: |
13815034152 |
| E-mail: |
|
|
|
|
Home
